Project

General

Profile

1.3. Table of specifications

Power supply external 12V - 36V DC
Current consumption up to 5A (depending on the voltage) from external power supply, up to 400mA from USB
Current in the motor winding up to 3A
Protection types current overload protection, voltage overload protection, short circuit protection, motor hotplug/unplug protection
Motion modes move left/right, move to point, shift on delta, continuous speed, acceleration and deceleration ramps, backlash compensation mode, automatic home position calibration mode
Step modes full-step, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
Rotation speed up to 35 000 full steps per second
Speed profile trapezoidal
Position counter 40 bit
Feedback quadrature encoder (optional)
Limit switches 2
Feedback bandwidth 200 kHz

Note: The controller's working voltage range is 12V to 36V DC. The voltage limits are 2V and 48V DC. If the voltage exceeds 48V, the controller is guaranteed to fail. If the voltage falls below 2V, the controller will be unable to rotate the motor.

Add picture from clipboard (Maximum size: 977 MB)