Project

General

Profile

3. Overview and getting started

This guide describes the operation of controller for multi-axis and one-axis systems, basic parameters configuration and getting started with XILab software for Windows 7.

  • One axis configuration - a brief description of the beginning of work with the controller + 8SMC5-USB for one axis +. It is also considered quick XiLab setup and lists all necessary equipment.
  • Example of a motor connection - connection of stepper motor Nanotec ST5918L3008-B with encoder CUI INC AMT112S-V to 8SMC5-USB controller. It is described how to make your own cable, guided by the specification on the engine and explanation of the specification is given.
  • Manual profile setting - setting of working profile for XiLab. Overview of the main features.
  • Calculation of the nominal current - setting of amplitude of nominal current for stepper motors.
  • Possible problems and solutions - description and solution of the most common problems when working with 8SMC5-USB controller.
Add picture from clipboard (Maximum size: 977 MB)