Project

General

Profile

Dimensions and arrangement

Structurally the controlled is designed as two boards, 47x75mm each, rigidly connected to each other. A logic controller and control systems are mounted at the bottom board, a power part is at the top board. A radiator at the power part is available.


Top view on the controller. The view from power part and radiator side.


Front view on the controller. The view from stage cable side.


Rear view on the controller. The view from backplane connector side.


Bottom view on the controller. The view from micro USB port side.

IMPORTANT. If you are mounting the radiator to the power part by yourself, please make sure that there is no contact between heat-conducting surfaces and conductive elements of the unit. Such contact may damage the power circuit! This warning is applicable only to controllers supplied without body.

Add picture from clipboard (Maximum size: 977 MB)